|
|
|
 |
| Home > Products > Access Control Power Supplies |
Access Control Power Supplies
|
 |
HP312CX
| The HP312CX switching power supplies/charger kit converts low
voltage AC input into 6 VDC or 12 VDC @ 2.5 A of continuous
supply current, or 1 A @ 24 VDC. This general-purpose power
supply has a wide range of applications for access control, security
and CCTV systems that require additional power. For convenient
operation, this power supply unit includes the power
supply board, a plug-in transformer, steel enclosure, 5 AH/12 V
battery, battery leads, and connecting hardware. |
|
| Specifications |
 |
Switch selectable 6 VDC/12 VDC/24 VDC.
– At 6 VDC or 12 VDC, the output is 2.5 A total; at 24VDC, the
output is 1.0 A total. If a battery charger is used, subtract
max charge current of 400 mA from total to determine allowable
load. |
 |
HP312CX includes the power supply (HPS3) and a 24 VAC thermally
limited 50 VA plug-in transformer with power LED indicator.
– Do not use enclosed battery for 6 VDC output; use a 6 VDC,
5 AH battery (suggested: Powersonic PS-650L). |
 |
UL-Listed to UL294 Access Control Systems and UL2044 CCTV
Equipment. |
 |
Filtered and electronically regulated output. |
 |
Built-in charger for sealed lead-acid or gel-type batteries. |
 |
Standby specification:
– At 6 VDC, unit provides two hours of standby at 2.1 A with a 6 V, 5 AH battery.
– At 12 VDC, unit provides two hours of standby at 2.1 A with a 12 V, 5 AH battery.
– At 24 VDC, unit provides eight hours of standby at 600 mA with two 12 V, 5 AH batteries. |
 |
Automatic switchover to standby battery when AC fails. |
 |
Thermally limited design. |
 |
Circuit breaker battery protection. |
 |
AC input (green) and DC output (red) LED diagnostic indicators.
• Hinged cover and vented enclosure with five convenient knockouts. |
 |
Temperature range:
32°F to 120°F (0°C to 49°C); indoor use only. |
 |
Enclosure dimensions:
10.0" H x 11.5" W x 4.875" D
(25.4 cm H x 29.21 cm W x 12.38 cm D) |
|
|