Fire Alarm Power Supplies HPFF12 - Honeywell Power Products

Home > Products > Fire Alarm Power Supplies and Communicators

Fire Alarm Power Supplies and Communicators

HPFF12 (CM) (E)

The Honeywell HPFF12 and HPFF12CM are Notification Appliance Circuit (NAC) Expander Power Supplies designed to extend the power capabilities of existing NACs and provide power for auxiliary devices. The HPFF12 and HPFF12CM connects to any 12 or 24V Fire Alarm Control Panel (FACP) or
stand alone.


Data Sheet - (448 KB PDF)
Manual - (PDF)
Mounting Dimensions
Application Note (PDF)
Battery Calculation (ZIP)
Class A adapter manual (PDF)
HPFF12 Drawing (DWG)
HPFF12 Drawing (PDF)
HPFF12CM Drawing (DWG)
HPFF12CM Drawing (PDF)

View Listing
View Listing

Specifications
	Primary Input Power: 120VAC, 60Hz, 5.4A standard; 240VAC, 50Hz, 3.2A on units with E suffix.
	Secondary Power: 24 volt operation: two 7-24 AH batteries.
	Battery Charging Capacity: Up to 26 AH batteries.
	HPFF12 Cabinet: Holds up to two 18AH batteries.
	HPFF12CM: Holds up to two 12AH batteries.
	Total Output Current: 12.0A max.
	Standby Current: 0.075 A.
	Auxiliary Power Output: 2.0A under all conditions.
	NAC Output Ratings: 24VDC fully regulated, 3.0A max per circuit (8.0A total).
	End-of-Line Resistor Range: 1.9K to 25k ohm, ½ watt. Product ships with 4 separate programming resistors. They are 3.9K (5 each - only need one for programming), 2.2K (1 each), 4.7K (1 each) and 10K (1 each)
	Common Trouble: 2.0A at 30VDC.
	Relay Fail Relay: 2.0A at 30VDC.
	Input Control Circuits: compatible with 12 and 24 VDC control panel NACs.
	Input Control Current (alarm): 5.68 mA @ 12 VDC, 12.28 mA @ 24 VDC.
	Temperature Rating: 32°F to 120°F (0°C to 49°C).
	Relative Humidity: 10% to 93% non-condensing.
	Cabinet Dimensions: • HPFF12 Cabinet: 16.65" W x 19.0" H x 5.2" D (42.29 W x 48.26 H 13.23 D cm) • Large equipment enclosure (EQBB-D4): 24" W x 45.9" H x 5.15" D (60.96 W x 116.52 H x 13.1D cm)