|
|
|
 |
| Home > Products > General Security Supplies |
General Security Supplies
|
|
HPS3
The HPS3 power supply/battery charger converts a low voltage
AC input into an output of 6, 12 or 24 VDC at 2.5 A of
continuous supply current. This general purpose switching
power supply can provide additional power for a variety of
applications such as access control, intrusion security, and
video system accessories.
|
|
| Specifications |
 |
DIP Switch selectable for 6 VDC, 12 VDC or 24 VDC output. |
|
2.5 amps of continuous supply current. |
|
Output is filtered and electronically regulated. |
|
Built-in charger for sealed lead acid or gel type batteries. |
|
Maximum charge current of 400 mA. If a battery charger is
used, subtract max charge current of 400 mA from total to
determine allowable load. |
|
Automatically switches to stand-by battery upon AC fail. |
|
Battery protected from short circuits. |
|
Thermal and short circuit protection with auto reset. |
|
LED indicators for AC input and DC output. |
HPS 3 Transformer Selection Table |
Desired Power Supply Output |
Transformer Rating |
6 VDC Output |
16.5 VAC 40VA |
12 VDC Output |
24 VAC 50VA |
24 VDC Output |
28VAC 100VA |
Note: Greater VA transformer may be used, but do not exceed VAC ratings. |
|
|
|
|
