Home  >  Products   >  Power Distribution Modules

Power Distribution Modules


HPTV09

The HPTV09 is a CCTV power distribution unit that converts a single AC or DC power input into nine individual outputs to centrally power video cameras, PIRs, photo beams, and other video accessories. It accepts a 6 – 30 V AC or DC (see Specifications) constant power source input which connects to either a terminal block or an internal 2.1 mm DC power receptacle. Each output is protected with 250 mA auto-reset PTCs to prevent a shorted output from disabling the other outputs.NOTE: To reset overcurrent, remove power for 3 minutes.

Data Sheet - (34 KB PDF)
Installation Instructions - (239 KB PDF)
Specifications
Input: 6 - 30 VAC, 50/60 Hz; or 6 - 24 VDC; using 2.1 mm plug or screw terminals.
Nine electronically regulated outputs are rated at 0.250 A each @ 25°C.
Maximum combined current draw not to exceed input power source or 2.3 A.
Power disconnect switch and power-on LED indicator.
Individual LED indicators for each output indicate operating PTC for troubleshooting.
Unit maintains camera synchronization.
Impact-resistant enclosure with snap-fit cover, four rectangular plastic wireway outlets, and one 3/4" knockout.
Operating temperature range: –4°F to +120°F (–20°C to 35°C).
Indoor use only with maximum relative humidity: 85% non-condensing at 86°F (30°C).
Enclosure dimensions:
   • 6.5" H x 4.3" W x 2.0" D
   • (cm: 16.51 H x 10.922 W x 5.08 D).

 

 

 

 

 

 

 

 

 
Search

 

 

The Honeywell Corporation
HP2412IL8
HPTV2408

HPTV2408-1

HPTV5DC8

 

Where to Purchase Our Products

Find a local sales office or convenient distributor near you.