Rack Mount Distribution Units HPR12DC416CBUL

Home > Products > Rack Mount Distribution Units

Rack Mount Distribution Units

HPR12DC416CBUL

These Honeywell Rack Mount CCTV power supplies will provide 12 VDC power distributed via 16 circuits for powering CCTV cameras and other video equipment. Each circuit will be fuse protected at 3.0A, or PTC protected at 2.5A. Fuses are accessible directly through the front panel by removing six screws.

Data Sheet - (258 KB PDF)

Installation Instructions - (371 KB PDF)

UL Listing DRQH.E309231

Specifications
	Input - 117V, 60Hz, 1A.
	Output - 4A @ 12VDC.
	Maximum current rating: any output, 2.5A; total supply, 4A @ 12VDC
	16 power limited outputs.
	Surge and transient protection.
	Transformer has built-in thermal protection.
	Indicator Lights: – Input Power Indicator (1 red): Illuminated power switch/circuit breaker. – Output Power LEDs (16 green): ON indicates that DC is present at the related output circuit.
	Overload Protection: – Input power switch has built-in circuit breaker. – AC line fuse (5 x 20mm glass). – Individual output circuits have a glass fuse (5 x 20mm) or resettable PTCs. – NOTE: To reset a PTC that has experienced an overload or short circuit, switch power off for 5 minutes to allow the PTC to reset itself.
	Factory installed three-conductor AC line cord with North American NEMA 5-15 plug (117V supplies) or European Schuko Type, CEE 7/7 plug (230V supplies).
	2U rack chassis for use in standard EIA 19” rack.
	Removable rear terminal blocks.
	Line power rocker switch with built-in circuit breaker indicates power on with red neon lamp.
	Designed for quick installation.
	Maximum Temperature Range: 32°F to 120°F (0°C to 49°C); for indoor use only.
	UL Listed for Commercial CCTV Equipment UL2044
	CUL Listed - CSA Standard C22.2 No.1-98, Audio, Video and Similar Equipment