Home  >  Products   >  Rack Mount Distribution Units

Rack Mount Distribution Units


HPR2432600UL

The HPR series Rack Mount CCTV Power Supplies
provide 24/28 VAC or 12VDC output distributed via
sixteen (16) or thirty-two (32) fuse or PTC protected
circuits for powering Video Cameras, heaters, blowers
and other video accessories.

Designed with advanced technology, the HPR Series
provides filtered power distributed to sixteen or thirty-two
output circuits, each configurable from the front panel for
24V or 28V operation in banks of 8 outputs. Taking just
2U of rack space, each circuit is fuse protected at 3.0 A,
or PTC protected at 2.5A with a total output capacity of 8,
12.5 or 25 Amps AC or 4/6A DC. Fuses and voltage
configuration switches are accessible directly through the
front panel by removing four screws.

Data Sheet - (258 KB PDF)
Installation Instructions - (404 KB PDF)
 
Specifications
Input - 117V, 60Hz, 6A.
Output - 600VA, 25A @ 24VAC or 21.4A @ 28VAC.
32 outputs.
Maximum current rating: any output, 3A; total supply, 25A @ 24VAC or 21.4A @ 28VAC**.
   ** Outputs 1 to 16 provide 12.5A @ 24VAC OR 10.7A @ 28VAC.
   ** Outputs 17 to 32 provide12.5A @ 24VAC OR 10.7A @ 28VAC.
Surge and transient protection.
Transformer has built-in, auto-resettable thermal protection.
Indicator Lights:
– Input Power Indicator (1 red): Illuminated power switch/circuit breaker.
– Output Power LEDs (32 green): ON indicates that AC is present at the related    output circuit.
Overload Protection:
– Input power switch has built-in circuit breaker.
– Individual output circuits have 5 x 20mm glass fuse or resettable PTCs.
– NOTE: To reset a PTC that has experienced an overload or short circuit, switch    power off for 5 minutes to allow the PTC to reset itself.
Factory installed three-conductor AC line cord with North American NEMA 5-15 plug (117V supplies) or European Schuko Type, CEE 7/7 plug (230V supplies).
Unit maintains camera synchronization.
2U rack chassis for use in standard EIA 19” rack.
Removable rear terminal blocks.
Line power rocker switch with built-in circuit breaker indicates power on with red neon lamp.
Designed for quick installation.
Maximum Temperature Range: 32°F to 120°F (0°C to 49°C); for indoor use only.
UL Listed for Commercial CCTV Equipment UL2044
CUL Listed - CSA Standard C22.2 No.1-98, Audio, Video and Similar Equipment


 
Search

 

 

The Honeywell Corporation

HPR2416UL

HPR2416CBUL

HPR2432300UL

HPR2432300CBUL
HPR2432600CBUL

 

Where to Purchase Our Products

Find a local sales office or convenient distributor near you.