Home  >  Products   >  Weatherproof NEMA 4X Video Power Supplies

Weatherproof NEMA 4X Video Power Supplies


HPV2808ULWP

The HPV2808ULWP power supply provides a non-power limited output of 28VAC @ 4.0 Amps of continuous supply
current. It can supply additional power for access control, security, and CCTV applications that require outdoor
installation. The unit consists of a thermally-fused transformer and an electrically-fused primary input in a NEMA 4X weatherproof enclosure with included mounting hardware.

The 28 VAC models are used for long cable runs from power supply to camera where voltage sag encountered. Verify that voltage at camera input is within the camera specification.

Data Sheet - (PDF)
Installation Instructions - (PDF)
Drawing - (787 KB DWG)
UL Listing DRQH.E309231 (US)
UL Listing DRQH7.E309231 (Canada)
Specifications
Input: 115VAC, 60Hz 0.9A
Output: 28 VAC, 60 Hz, 4.0 A.
Fuse Ratings:
– AC Terminal Block: 3A 5 x 20mm 250 VAC
– Output Circuit Board (Main Fuse): 5.0A Auto Fuse
– Output Circuit Fuse Board: 3.0A Auto Fuses per each output circuit.
Eight fused outputs rated 3.0 A each.
Includes power switch, transient protected outputs, output LED indicator, and diagnostic LEDs per circuit.
Transformer with built-in thermal protection
Power disconnect swith is for easy servicing.
Nema 4x/IP66 rated enclosure is molded from non-metallic corrosion-resistant, polycarbonade resin, and uses stainless steel and brass hardware. Enclosure latches shut with a lockable hasp.
Temperature range: -40° F to 120° F (-40° C to 49° C)
Enclosure dimensions 12.5" H x 11.5" W x 7.5" D (31.8 cm H x 29.2 cm W x 19.1 cm D)
   

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 
Search

 

 

The Honeywell Corporation

HPTV2404WP

HPTV2804WP
HPTV2404WP-2
HPTV2804WP-2

 

Where to Purchase Our Products

Find a local sales office or convenient distributor near you.