HPACM8 Power Distribution Boards
This distributes one 12 to 24 volt AC or DC input over four or eight independently controlled class 2 power-limited outputs rated 2.5A per output. The outputs can also be configured as dry form "C" contacts. Activated by an open collector sink or normally- open dry trigger input from an Access System, Card Reader, Keypad, Push Button, PIR, etc. Outputs operate both fail-safe and fail-secure and will power Mag Locks, Electric Strikes, Magnetic Door Holders, etc. Powered by either one common source or by two independent sources, one for board power and the other for accessory power. The FACP interface can trigger emergency exit, monitoring, HVAC shutdown, elevator recall or other auxiliary devices. The fire alarm disconnect is configurable for all affected or 50/50 mode.
|No. of Outputs:||8|
(W x H x D)
|4.5" x 8"