HRB610 Multi-voltage Control Relay
Control relay cluster offers SPDT contacts which may be operated by 12 VDC or 12 VAC by wiring to the input terminals or 24 VDC or 24 VAC by cutting a resistor. 50 mA coil draw per module position. Coil input is diode polarized to allow reverse polarity control. One red LED per module position. Load is rated resistive, 10A @ 120 VAC/28 VDC or 7A @ 230 VAC. Contacts are dry Form "C" SPDT per module position. Single relay modules may be "snapped apart' from a standard six position cluster and used separately. Snap track and six pieces of foam tape included.